4/19/2021 0 Comments Bernina 540-2 Manual
Have you tried rethreading the machine If so, be sure to ALWAYS RAISE the presser foot.You might try leaving it turned on for quite a while (several hours), then turn it off and back on and see if it will reset itself.
![]() ![]() Very common on these older mechanical machines that have not been regularly maintained. The stitch width selector probably is not shifting because it is stuck. Wheel on right side that controls the needle up and down is very tight. Sounds like your problem may have to do more with the amount of pressure the presser foot applies to the fabric. A lot of machines have a pressure adjustment so you would need to increase the pressure when sewing fine fabrics. You can also lay tissue paper (like the paper used for patterns or gift wrap) on the fabric which will help you control the fabric as you stitch. As for tension, be sure you are using a fine sharp needle, like a 65 or 70 Microtex and a fine light weight thread. Using a different presser foot may be useful--perhaps a walking foot if you have one. A looser top tension setting could prevent fabric puckering but so will adding tissue paper or fabric stabilizer. Tips For Sewing Fine Fabrics Sewing with Silk Slippy Fabrics. Personally, I recommend picking up a stand-alone bobbin winder (called Sidewinder) for 30 at JoAnns, Amazon, etc. Makes bobbin winding fast and easy, can be wound without unthreading the machine, and saves wear and tear on your sewing machine. Ive read where Berninas have been sent to Chicago for repair and can take up to six months. You may NOT copy or distribute the content that appears on this site without written permission from Fixya Ltd.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |